bswzzl Posted April 2, 2017 Share Posted April 2, 2017 So I got these Polk Audio speakers from my step-dad and they came with no cables and I'm not sure what kind of cable I would need to be able to connect it to my receiver or turntable. I'm new to actual set-ups outside of just using a turntable's internal speaker so help and knowledge is appreciated Below are the pictures of the back of the polk audio speakers and the back of my receiver. http://imgur.com/a/73Bun Quote Link to comment Share on other sites More sharing options...
Tardcore Posted April 2, 2017 Share Posted April 2, 2017 Any speaker cable will do the job. It looks like your speakers are able to accept a banana plug but your receiver will only take bare wire or a pin connector. You'll probably have to go custom for that configuration. if you want to do it right, head over to bluejeans cable and take a look at their products. bswzzl 1 Quote Link to comment Share on other sites More sharing options...
Jlegg Posted April 2, 2017 Share Posted April 2, 2017 the red and black knob on the back of your speaker should twist out if you twist them counter clockwise. If they do, wrap speaker wire around the post and twist the knob back down. If they do not twist out, you will need some banana plugs as Tardcore has mentioned. bswzzl 1 Quote Link to comment Share on other sites More sharing options...
slinch Posted April 2, 2017 Share Posted April 2, 2017 OP, do this, but with your speakers: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.