qpgdy Posted November 4, 2017 Share Posted November 4, 2017 Hello, I'm fairly new to vinyl and I'm having a bit of trouble. I recently got an AT-LP60 which I have connected to my laptop through an AUX cord to Line-in on my laptop. Through there, I have all of my audio default to going through my Blue Yeti USB mic through the headphone jack and into my ATH-M50x s. It's not pretty, but it works...only in my left ear. The vinyl audio only ends up going to my left ear in my ATHs. I have checked with multiple records, and the problem persists. With such a complex setup, I understand that there likely isn't one clear answer. What should I check to troubleshoot? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
ryantark Posted November 4, 2017 Share Posted November 4, 2017 (edited) 1- Play Lp60 out of laptop speakers. Comes out of both L and R? Move on. (Do laptops do stereo? I’m assuming so. Or, does the LP60 have a direct headphone jack to try?) 2- Lose the Yeti, test via headphone jack out of laptop into headphones. Comes out both L and R? Move on. If it fails 1, it’s the LP60, cord, or computer. If it fails 2, it’s the headphone jack, cable, or headphones. If it passes 1 and 2, it’s the Yeti. Someone check my logic. The basics...test with as few components as possible, expanding as things continue to work. Also, mods, move this to equipment section. Edited November 4, 2017 by ryantark YesPlease 1 Quote Link to comment Share on other sites More sharing options...
harryq Posted November 4, 2017 Share Posted November 4, 2017 I'd also try recording in Audacity to see if it's only recording on one channel. That said, when I first bought my Bose headphones, the sound only came out of the left speaker. Then I realized I hadn't plugged the cable in all the way... so maybe check that, too Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.