Pressure Posted January 31, 2019 Share Posted January 31, 2019 I’ve got a pioneer PL-560 with no pre-amp. And some pioneer cs-m755 speakers that run at 30-20000hz, 8 ohms, and max 150w. My receiver just went bad, and I was wondering if I could make a setup without a receiver? Do I need an equalizer with the amp? Do I need a preamp before the amp? What’s my optimal setup? thanks Quote Link to comment Share on other sites More sharing options...
A-Bon Posted January 31, 2019 Share Posted January 31, 2019 2 hours ago, Pressure said: I’ve got a pioneer PL-560 with no pre-amp. And some pioneer cs-m755 speakers that run at 30-20000hz, 8 ohms, and max 150w. My receiver just went bad, and I was wondering if I could make a setup without a receiver? Do I need an equalizer with the amp? Do I need a preamp before the amp? What’s my optimal setup? thanks you will need a phono preamp for starters ... if its just a straight amp then you will need a reciever... what amp have you got?? Quote Link to comment Share on other sites More sharing options...
Pressure Posted January 31, 2019 Author Share Posted January 31, 2019 No amp. It was an old pioneer receiver that had a phono jack, so it had a built in preamp. Quote Link to comment Share on other sites More sharing options...
Pressure Posted January 31, 2019 Author Share Posted January 31, 2019 I was thinking of an NAD. C 316BEE V2 for an amp. And was wondering if that was all I needed? Quote Link to comment Share on other sites More sharing options...
NapalmBrain Posted January 31, 2019 Share Posted January 31, 2019 the NAD is a pretty good amp at its price point, my shop is an authorized dealer and I'm pretty impressed for the price. If you have a receiver without a phono stage already it might be more affordable to buy a nice preamp instead, get a rega fono mini 2ad, also gives you the option to digitize your collection and it's a really good phono stage it will be a noticeable upgrade from your previous receiver for only about $175. Quote Link to comment Share on other sites More sharing options...
Pressure Posted January 31, 2019 Author Share Posted January 31, 2019 I’m trying to get this system as simple, minimal, and powerful as possible. Without blowing my budget. I only listen to vinyl records, so I don’t need any other inputs other than an analogue for phono. No need for video or cd etc... So, I figured I could just bypass the receiver and go strait to an amp with two, maybe 4 channels. Are there any good amps that fit this description, and is this all I need? Quote Link to comment Share on other sites More sharing options...
Pressure Posted January 31, 2019 Author Share Posted January 31, 2019 I know the NAD doesn’t really fit that description, but it’s close. Quote Link to comment Share on other sites More sharing options...
Pressure Posted January 31, 2019 Author Share Posted January 31, 2019 I was also looking at Marantz PM5005 and a few other similar types. But maybe there is some good vintage equipment that would be better suited for my situation? Quote Link to comment Share on other sites More sharing options...
imnothardcore Posted May 1, 2019 Share Posted May 1, 2019 On 1/31/2019 at 9:48 AM, Pressure said: I was also looking at Marantz PM5005 and a few other similar types. But maybe there is some good vintage equipment that would be better suited for my situation? Yes, the Marantz PM5005 has a phono input, Its one of the ones I was looking at before I ultimately ended up with my Yamaha AS500 (also has a phono input). If you keep an eye out for these used you can usually find a pretty good deal. My AS500 used with a really scratched up volume up knob cost me around $100 and I eventually just ordered a new volume knob from Yamaha for like $7 or something and the entire amp looks brand new now. If you're patient for used you'll come across something. I added a few amp models to my eBay search so I got a notification when that model number was listed. Also search/set notifications for stuff like 'let go', 'offer up' and facebook marketplace. GOOD LUCK! Quote Link to comment Share on other sites More sharing options...
Tardcore Posted May 1, 2019 Share Posted May 1, 2019 important to understand that a receiver is by definition a preamp + amplifier + radio receiver. Usually at minimum you need an "integrated amplifier" which is simply a preamp + amplifier. The "preamp" part of the equation is basically volume control. Products like PM5005 or C 316BEE are Integrated amplifiers and will work great for a vinyl setup as they also include a "phono preamp". a "phono preamp" is not to be confused with the "preamp" mentioned above. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.