Connecting headphones to a turntable.

[DropJoBear]

Hi,

After getting some half decent headphones I have been trying to connect them to my Project Audio Jukebox E turntable which comes with an integrated amplifier and phono stage. Would the easiest way to do this be to get a headphone amplifier or is that not necessary since there is an already integrated amp. It has Line Out, Phono Out, In 1 and speaker ports.

 

Some advice would be greatly appreciated.

[mitchard]

https://www.amazon.com/Connector-Female-Amplifier-Speakers-Theater/dp/B07DNXZBW4/ref=asc_df_B07DNXZBW4

Grab one of these and connect it to the out. Should do the trick, assuming we're talking about wired headphones. 

Edited February 28 by mitchard

[mitchard]

Deleting double post.    

Edited February 28 by mitchard
Deleting double post.

[Tardcore]

I don't think this is very good advice.  Line Out should only output a static line level signal as opposed to a Pre Amp out which would provide a variable attenuated signal.

 

You should get a headphone amp of some kind and plug it into the Line Out.

[mitchard]

On 3/15/2023 at 11:59 AM, Tardcore said:

I don't think this is very good advice.  Line Out should only output a static line level signal as opposed to a Pre Amp out which would provide a variable attenuated signal.

 

You should get a headphone amp of some kind and plug it into the Line Out.

Good to know, thanks!