Jump to content

solemncountry

Members
  • Posts

    10
  • Joined

  • Last visited

  • Feedback

    0%

Posts posted by solemncountry

  1. Are you talking about a 1/4" adapter? A lot of those adapters are tip, ring, sleeve (TRS).  You will notice that there are rings on the plug itself. Try not plugging the adapter into the amp all the way (you can usually feel it click over the rings as you push it in).  Instead of pushing in all the way, just push in one click.  This has worked for me with fickle PA systems that just won't seem to accept certain 1/4" plugs and only play one channel. Try it with music playing (out of your phone or whatever) and play with it until both channels come through.  

     

    tl;dr Don't push the adapter all the way in.

     

    Hope this helps.  

  2. 9 hours ago, Tardcore said:

    as far as output impedance, the main concern is whether or not your amp can drive 4 ohm speakers.  A lot of consumer AV gear will only commit to 8 ohm in their documentation.  Your speakers will normally list their impedance on the back somewhere or, at the very least, buried in the manual.

    Makes sense.  Thanks!

  3. Please excuse the neophyte question:

     

    When does one need to be concerned with impedance matching of speakers/receivers when buying equipment?  

     

    I notice A LOT of speakers do not even make note of their impedance and neither do some receivers.  I have even read on different sites that impedance matching isn't a concern for most solid state equipment.  Coming from the world of mixing live sound and guitar amp/cabinet matching, impedance matching is something I am very familiar with and is often a major concern.  

     

    Thanks in advance!

  4. I think this is a common issue with this turntable.  I have the same turntable and it does the same thing.  Freaked me out for a day or two but then I realized my records all play well and it doesn't seem to affect any contact with the needle.   I probably know as much as you but from my experience it isn't an issue.  

×

AdBlock Detected

spacer.png

We noticed that you're using an adBlocker

Yes, I'll whitelist