Jump to content

dangerben

Members
  • Posts

    142
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    0%

Posts posted by dangerben

  1. loving that EQ man - looks real fun - do you play around with it much? or just have it set to a standard curve and leave it?

    cheers, typically i have it set a little low on the bass, because i also have a sub off to the side of the room that isn't pictured. And it does fine without any boosting, but if i put say a jazz record on i'll load the mid and top, if i have a more rocky record i'll flatten the top off and bumo up the bass. So i do play with it, just not too often, i tend to be a moody jerk and listen to the same styles for a week or so at a time

    how much was it?!

  2. [image]

    Michell Gyrodec & Rega Planar 2 Turntables

    NAD C521CEE CD Player

    Marantz PM7200 Integrated Amp

    Project Phono Box MkII (to connect 2nd deck)

    Mission Floorstanding Speakers

    + an old Pioneer Tape deck and Philips CD Recorder

    amazing setup! correct me if im wrong, but are those frames above your set up the play and display frames? artvinyl.com.au/play-and-display.html

    If so, i just scored some as a birthday gift and i just couldn't be happier with them!! do you swap out the records often?

  3. Dude that looks kick ass!! Well done. Remember all cartridges, and TT belts/motors have a break-in period. You think it sounds good now?..wait till after 40hrs :)

    Hey thanks a lot man! yeah i've had it running pretty much non stop since i've got it. I really should try and record something being played now and re record the same thing in a month or two and see the difference..

    The Speakers are really opening up noticably already - much more controlled bass and just sounding a lot fuller which is a welcome surprise!!

  4. Hi guys,

    Just a quick post to let those of you that are interested know that I finally got my act together and bought my kit the other day. See below for components and links to product pages.

    Pro-Ject Xpression III Classic - in mahogany finish (looks incredible)

    http://clefhifi.com.au/catalog/product_info.php?cPath=36&products_id=1300

    Ortofon 2M Red Cartridge

    Yamaha A-S500 Integrated Amp

    http://clefhifi.com.au/catalog/product_info.php?cPath=34&products_id=1285

    Krix Equinox Bookshelf Speakers

    http://clefhifi.com.au/catalog/product_info.php?manufacturers_id=10&products_id=422

    Putting it all together I was so nervous - I had tried all the components together at the store, but all worst case scenarios were playing through my head, luckily nothing went wrong and the sound is just incredible - perfect crisp highs, nice defined low end (which surprised me alot considering how small the speakers are) and literally no background noise / hum from the turntable.

    All up I got everything for $2200 which was incredible seeing as my budget was $2000 to begin with and I was expecting to leave the store with only the A-S300.

    [image]

    [image]

  5. Also, do you need an integrated amp? Are you going to be using all those inputs? Hooking up a CD player, tape deck, DVD player, tuner, etc?

    I don't *need* an integrated amp - I have a media center (Linux Server running Boxee) and a PS3, and it would be nice to run all of these through one receiver.

    However, if I can cut costs dramatically without sacrificing audio quality, I'd have no problem having a dedicated stereo receiver with a phono phase.... I just don't know what is out there to be honest.

  6. What is your budget dangerben? What is your set up now, do you have OK speakers / receiver? Sometimes it's better to buy a new receiver with a phono input than to get a preamp, especially one that's $200.

    My current setup sucks. I'm using a no-name table that has inbuilt speakers that i bought purely for aesthetic reasons (I'm a sucker for bare wood products)

    [image]

    the speakers are terrible - hardly any tonal range. good for acoustic stuff, but fall over when anything gets loud. I was thinking of soldering some RCA connections to the back of the box and running leads out to my media center but just haven't found the time.

    my budget is currently sitting at $2000. thats half for the table and half for the rest of the setup. I actually did a bit of snooping around and think i may have found a nice rig.

    AMP - NAD C316 $449

    http://www.carltonaudiovisual.com.au/?q=node/view/1329

    SPEAKERS - Monitor Audio BX2 <$600

    http://www.carltonaudiovisual.com.au/?q=node/view/1373

    PHONO PRE - Cambridge Audio 540P Phono stage $150

    http://www.carltonaudiovisual.com.au/?q=node/view/705

    That goes a bit above my budget, and obviously if I could get an amp / receiver that had phono input it would cut my cost a bit.

    I guess the beauty of buying the pre-amp would be that I could buy the Xpression III and the pre-amp and run it through my media center until I could comfortably buy the amp and speakers which would then replace the speakers in my media center...

    Any criticism on the above amp / speakers? Is there anything better out there for that price point?

  7. Hi Guys,

    Really wanting this record. Dropped cash on it for a pre-order to Blue Grass Records and it never arrived. Have tried over and over and over to get in contact with the distro to no avail.

    I'm not even mad about losing the cash to be honest, I just really want the record. Such a great band.

    Willing to pay cost-price and postage if anyone is willing to let go of it. Might try again with blue grass, but I don't want to keep sending the bastard cash.

    Thanks.

  8. Hi Guys,

    New to the board, thought I'd jump in with both feet so to speak.

    I've been collecting records for the last 8-9 years and have never really had a nice table - I've had about 3 budget fully auto players in that time and they have served me pretty well - not overly happy with the sound quality, but have never really had the cash to do anything about it... But now I do...

    So I'm thinking of forking out a big chunk of change on a Pro-Ject Xpression iii...

    http://www.encelstereo.com.au/encel/Brand03pop.asp?id=3729

    Has anyone had any experience with it? Is it noticeably different from the Pro-Ject Debut?

    Realistically, I should probably go with the Debut just because of the considerable price difference, but a) I don't much care for the bright colours it comes in, and I *love* the woodgrain finish the Xpression comes in, B) If I get the Debut, knowing me, I'd probably want to upgrade in a few years anyway... and c) the Xpression comes with an Ortofon 2M Red Cart, which seems like a nice upgrade...

    Also, while speaking of Pro-Ject stuff, has anyone got bad things to say about their phono pre-amps? I'm looking at getting the table and the preamp from the same store at the same time, but if there is something better for around the same price point I'd be willing to change it up...

    Thanks in advance for any suggestions or help!

×

AdBlock Detected

spacer.png

We noticed that you're using an adBlocker

Yes, I'll whitelist