Jump to content

Help!


Recommended Posts

Okay, so my table has to be screwing up on me. I've had absolutely no issue with any of my records up until the past week. I can't play a single album without it skipping all over the place. It started skipping when I moved my player from one side of the room to the other, but I didn't bump it or anything so I know that's not the issue. I don't see anything wrong w/ the needle (dust/break). I tried adjusting the anti-skate and the counterweight and that didn't seem to do anything productive. I took off the stylus and reattatched it and that seemed to help a tiny bit, but not enough.

Link to comment
Share on other sites

It sounds like your needle doesn't have enough weight to hold it down and rid in the grooves, one of your counter weights may have been moved when you moved the table. Check the one at the end of the arm opposite the needle. Might be like a donut around the tone arm, see if you can't push something forward toward the needle. This will help apply more weight to that end of the arm and help that needle get its groove on. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×

AdBlock Detected

spacer.png

We noticed that you're using an adBlocker

Yes, I'll whitelist