wire

yes,thanks for the help to all of you!! please a mod to lock this thread

check the VTF again and when i first put my stylus on the digital scale shows 1.56 and then continues ro rise for a long time.. scale is calibrated but low on battery,if anything has to do with weird rise..

you don't help with this attitude...

also i use my digital stylus gauge again and its not accurate.. is normal to be like this?

I want to proper level my rack,platter etc. There are opinions about damaging cartridges with magnetic ones anyway thanks very much for the help! edit: tonearm starts to lose at this point..

yeah i try some records and is in the label so im allright or i have to fix it somehow? also i have another question about magnetic torpedos,is it safe or not? in some forums the views are divided..

here is a video with the problem.. or is it normal? as you can see in the end of the video,tonearm lowered down near the spindle..

i have another problem now, when i move the tonearm with my hands (with the cueing lever up!) In the middle of the platter starts to lowering and almost touch the platter.. photos

The sound for now is ok,in the near future i will buy amp and speakers..

a positive reply at last,haha.. the model is sony mhc rg 490,i have it for ten years i think. im somehow relaxed about the leveling thing,im gonna try a torpedo level anyway just to see.. i also try an old pair of logitech speakers,i think the cart is bright and somehow lacks midrange.. also i see the VTF with digital gauze and its 1.6,the ortofon om10 is between 1.5-1.75 so its ok..

ok man its not my native language so dont be rude.. anyway thanks

the most aluminum ones are also magnetic so a 20cm plastic one is ok?

thanks for the info but VTA is not adjustable in debut carbon,also i cant find anything about how to check if VTA is correct. At the moment i don't have a torpedo level,can you tell a a good brand? i think not the magnetic ones,right?

edit: video deleted

tonearm start to move only in the last track as i can see.. No i dont notice anything like hum. I dont know how to check VTA.. also when i use a record and then the bubble the readings are ok,in platter itself the bubble has an error all the way when i place it in outer edge of the platter ,all the readings are in the opposite direction when i rotate it.

My issue now is leveling not the sound,i dont want to ruin my lps... After all when i place a record in the platter and then the bubble the readings are good,but without record is not.. also is normal for tonearm to move a little?

I try to level the turntable but i cant. debut carbon has not adjustable feet so i try with old cds under feet . Also i think the floor is not level.. im frustrated and its my first turntable,now im afraid ill ruin my lps...

thanks for the info,im trying to level the platter but its difficult.. in the center is ok but in other places is a bit off anyway ill try more... i have also i set of logitech speakers with more neutral sound,i will try them too.. yeah there is a little lack of bass also.. anyway thanks and keep postin ideas especially for leveling..

debut carbon with ortofon om10 and rega fono mini to an old sony hifi audio in is the setup,anyway i found my turntable is not leveled enough. someone tell me how to level the project debut,there are no adjustable feet as i can see.. also i have to level the furniture the turntable is in or only the platter?

I have dynavox tpm 001 digital gauze and the reading is 1.59 in ortofon om 10.. now im trying to level it but the readings on spirit level is ok in the centre and a little off (still in the bubble circle but not dead on) in back of the platter.. is this ok or can damage my records?? Please help,im new to this and im frustrated..

Speakers are bright with digital files as well but i feel more with turntable/phono. Also i check again connections,VTF and i see with a bubble spirit,platter is not level.. i use it in all over the platter. the bubble is not out the circle,but not in the center eithher. Please tell me if is ok as it is..

Hi there today i set up my new debut carbon with ortofon om10 and rega fono mini to an old sony hifi and the results are bright sounding system. After an hour or so of listening im tired of the sound and i have a slight headache.. Is this because ortofon is not burned in? Please tell me your opinion or what to do for more smooth sound.. thanks

what?!? relapse site says Release Date: June 17, 2016..

layout is nice but this color is terrible,my eyes hurt! please add some skins..

What's your opinion about surface noise etc. in blue/green versions?