EntryLevelDave Posted February 14, 2014 Share Posted February 14, 2014 Hey Guys, I'm still new to this stuff, so if i'm missing something obvious, go easy. I've had my player since Christmas of 2012, but have been using it pretty heavily since December 2013. Lately i've been having an issue where it is either skipping through some of the records, or it sounds like the cartridge or something is also rubbing against the record, along with the Needle. I tried recalibrating the arm, and I think i've got that down, but the issue remains. Is it time for a new needle? Any suggestions or advice would be greatly appreciated. Thanks, Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 14, 2014 Share Posted February 14, 2014 What kind of turn table do you have? Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 14, 2014 Author Share Posted February 14, 2014 Gemeni XL-400 II What kind of turn table do you have? Quote Link to comment Share on other sites More sharing options...
kamalatapes Posted February 14, 2014 Share Posted February 14, 2014 Does your tone arm have a counterweight? Is the anti-skating off weight causing it to "skate outwards" during the skip? Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 14, 2014 Author Share Posted February 14, 2014 It does have a counter weight. I read about re-calibrating it, and I went through those steps. I have the anti-skating set to 2 right now. It seems to be having the most trouble with Sink or Swim by Gaslight Anthem, which is a clear record. Not sure if that matters, but i read somewhere that those have issues? Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 14, 2014 Author Share Posted February 14, 2014 Just threw on a non-clear record and it is working much better. Is this just a problem with clears? Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 14, 2014 Share Posted February 14, 2014 It does have a counter weight. I read about re-calibrating it, and I went through those steps. I have the anti-skating set to 2 right now. It seems to be having the most trouble with Sink or Swim by Gaslight Anthem, which is a clear record. Not sure if that matters, but i read somewhere that those have issues? I have issues with that clear LP as well but you said you were having troubles with all of your vinyl. As for the TT are your anti skip and counterweight set to the proper setting for your cartridge? Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 14, 2014 Author Share Posted February 14, 2014 Not sure to be honest. Is there a way to find out which cartridge I have without disassembling the thing? I have issues with that clear LP as well but you said you were having troubles with all of your vinyl. As for the TT are your anti skip and counterweight set to the proper setting for your cartridge? Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 14, 2014 Share Posted February 14, 2014 Not sure to be honest. Is there a way to find out which cartridge I have without disassembling the thing? It depends on the cartridge. Can you snap a few pics of it and post them here. You will not be able to properly calibrate the TT without knowing the settings that correspond with your individuals cartridge. Quote Link to comment Share on other sites More sharing options...
hipsterasfolk Posted February 14, 2014 Share Posted February 14, 2014 Just threw on a non-clear record and it is working much better. Is this just a problem with clears? Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 14, 2014 Share Posted February 14, 2014 Just threw on a non-clear record and it is working much better. Is this just a problem with clears? I don't see why the record color or lack thereof would matter. Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 14, 2014 Author Share Posted February 14, 2014 I'm sure there was a better way to get you these pictures, but best I could do. http://picpaste.com/photo_3-OTZzIa2F.JPG http://picpaste.com/photo_2-jBi0mLVV.JPG http://picpaste.com/photo_1-EsZvz3mf.JPG Quote Link to comment Share on other sites More sharing options...
circuit bored records Posted February 14, 2014 Share Posted February 14, 2014 Are you cleaning your records with a wet solution? If not, it's probably static build up, common on new records. Quote Link to comment Share on other sites More sharing options...
hipsterasfolk Posted February 14, 2014 Share Posted February 14, 2014 AS I mentioned in the last thread, colored records are meant for decor. Hence why your black records will always sound better, they are made to be played on turntables. This is why most records purchased at your local shop will be black "variants." Also Crosley is known for making colored record players that play records better than traditional "black TTs" mcguirk 1 Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 14, 2014 Author Share Posted February 14, 2014 The record having the most trouble was fresh out the box. What kind of wet solution would I need? Are you cleaning your records with a wet solution? If not, it's probably static build up, common on new records. Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 14, 2014 Share Posted February 14, 2014 I'm sure there was a better way to get you these pictures, but best I could do. http://picpaste.com/photo_3-OTZzIa2F.JPG http://picpaste.com/photo_2-jBi0mLVV.JPG http://picpaste.com/photo_1-EsZvz3mf.JPG I cant tell what it is from the pictures alone. It looks like the stock stylus for this TT is the MG-2501. Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 14, 2014 Author Share Posted February 14, 2014 What are your thoughts on the static issue yanquiuxo alluded to? The records having the most issues have been new, freshly un-packaged. Thanks everyone for the feedback. This record noob appreciates it. I cant tell what it is from the pictures alone. It looks like the stock stylus for this TT is the MG-2501. Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 14, 2014 Share Posted February 14, 2014 What are your thoughts on the static issue yanquiuxo alluded to? The records having the most issues have been new, freshly un-packaged. Thanks everyone for the feedback. This record noob appreciates it. Man I am not really sure but the wet solution is certainly worth a try. I'd also say its about time for a new stylus. I usually get around a year out of mine. I've had some issues with static but never to the point to where it effected the play of my records; however, static problems vary in based in the moisture in the air so other places may have more issues that where I live. Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 15, 2014 Author Share Posted February 15, 2014 Okay, I'm just gonna suck it up and replace the Cartridge and Stylus. I figure do both since I have no clue which Cartridge I have, thus not knowing what Stylus I need. Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 15, 2014 Author Share Posted February 15, 2014 Nope, never mind Found a logo. It's an Audio Technica Cartridge. Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 15, 2014 Share Posted February 15, 2014 Okay, I'm just gonna suck it up and replace the Cartridge and Stylus. I figure do both since I have no clue which Cartridge I have, thus not knowing what Stylus I need. You can probably get by with just replacing the stylus. It will save you some cash. I'd give the cleaning liquid suggestion a try as well if you are already ordering stuff. Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 15, 2014 Author Share Posted February 15, 2014 Cool man, now that I know what kind of Stylus I need i'm feeling good about just ordering that. Thanks for all your help everyone! Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 16, 2014 Share Posted February 16, 2014 Cool man, now that I know what kind of Stylus I need i'm feeling good about just ordering that. Thanks for all your help everyone! Keep us posted. Quote Link to comment Share on other sites More sharing options...
EntryLevelDave Posted February 20, 2014 Author Share Posted February 20, 2014 New stylus in. No skips so far. Have the clear vinyl one going that caused all these problems and it's going fine. Thanks for your help! Quote Link to comment Share on other sites More sharing options...
jtcohenour Posted February 20, 2014 Share Posted February 20, 2014 New stylus in. No skips so far. Have the clear vinyl one going that caused all these problems and it's going fine. Thanks for your help! That is great news! Enjoy, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.