Gumbo72203 Posted June 10, 2015 Share Posted June 10, 2015 So, I've been reading over the FAQ and checking out Needledoctor.com and everything they have there, but I would like to get opinions on what everyone uses to clean their records. This is thread is sparked by my just receiving a copy of Gates - You Are All You Have Left To Fear which sounds amazing, but is quite noisy. I also have some other records in dire need of a cleaning due to pops and static. So, I'm looking to pick up a brush to help clean off dust and hair and particles from the jackets. I'm also looking at an anti-static brush. Then I would also like to get something that actually cleans and de-statics the records. Any thoughts on this stuff: http://www.needledoctor.com/Stanton-VC-1-Vinyl-Cleaner or this: http://www.needledoctor.com/Gruv-Glide I'm kind of not sure where to really start.... I want to be able to brush off my records before I play them, and give a cleaning to the ones that have static and noise from being dirty. Quote Link to comment Share on other sites More sharing options...
KingTacoMunster Posted June 10, 2015 Share Posted June 10, 2015 Windex and a wire brush...is all one needs. xxsilence, Billich0986, Tommy and 1 other 4 Quote Link to comment Share on other sites More sharing options...
YouTwo Posted June 10, 2015 Share Posted June 10, 2015 At the very least, I would get a Spin Clean for $79. Keep in mind, cleaning a record may help, but it won't eliminate pops due to static. Quote Link to comment Share on other sites More sharing options...
dethrock Posted June 10, 2015 Share Posted June 10, 2015 When I first got into records I bought a Spin Clean. Definitely a worthwhile investment. It definitely gets rid of static. I've heard people complain their records sound worse after using the Spin Clean, but they're obviously not doing it right. I have a brush I use on new records before I clean them because there's usually pieces of paper stuck to them. Quote Link to comment Share on other sites More sharing options...
YouTwo Posted June 10, 2015 Share Posted June 10, 2015 When I first got into records I bought a Spin Clean. Definitely a worthwhile investment. It definitely gets rid of static. I've heard people complain their records sound worse after using the Spin Clean, but they're obviously not doing it right. I have a brush I use on new records before I clean them because there's usually pieces of paper stuck to them. I went through some miserable experiences with the Spin Clean and having records have more surface noise. Then I figured it was because I was letting too much fluid air dry on the record. I started drying them as soon as I took them out of the bath and haven't had a problem since. Quote Link to comment Share on other sites More sharing options...
vinylfilmaholic Posted June 10, 2015 Share Posted June 10, 2015 I went through some miserable experiences with the Spin Clean and having records have more surface noise. Then I figured it was because I was letting too much fluid air dry on the record. I started drying them as soon as I took them out of the bath and haven't had a problem since. I had that issue too and returned it to Amazon. Maybe I should give it another chance. Those cloths they supplied were terrible, maybe I should get some micro fiber cloths to use instead. Quote Link to comment Share on other sites More sharing options...
allenh Posted June 10, 2015 Share Posted June 10, 2015 Like everything to do with hifi some things are cheap and some are not and in general you get what you pay for but not always. For dirty records on the cheap a spinclean or a knosti discostat. For dirty records more expensively but properly use a proper vacuum washing machine like the VPI, Lorricraft or Okki Nokki. For really dirty records use wood glue, search it on you tube. This is no joke and there is no more effictive way to clean a really dirty record but the first time you do it takes balls of steel. For static a decent anti static brush or dest of all a Zerostat and an Acrylic platter or platter mat. And after your records are properly wash, dried and static free new poly lined inners are always good and better protection for your records. Quote Link to comment Share on other sites More sharing options...
aarondltd Posted June 10, 2015 Share Posted June 10, 2015 Which anti-static brush is actually anti-static? Because the audio-quest creates a ton of it. Quote Link to comment Share on other sites More sharing options...
YouTwo Posted June 10, 2015 Share Posted June 10, 2015 I had that issue too and returned it to Amazon. Maybe I should give it another chance. Those cloths they supplied were terrible, maybe I should get some micro fiber cloths to use instead. I used microfiber cloths, but I ended up going back to the ones that it came with. The microfiber ones seemed to be creating a lot more static on the record after I cleaned it. That didn't happen with the supplied cloths. Quote Link to comment Share on other sites More sharing options...
Gumbo72203 Posted June 11, 2015 Author Share Posted June 11, 2015 could it be that I just have a noisy pressing? Is that a thing? Because when I put the needle on for this Gates record, there's just a TON of noise. So much so that you can still hear it over the music. I was thinking about a SpinClean but that seems like such a gimmicy kind of thing.... do they actually work? Quote Link to comment Share on other sites More sharing options...
allenh Posted June 11, 2015 Share Posted June 11, 2015 Which anti-static brush is actually anti-static? Because the audio-quest creates a ton of it. Yes I have heard that, I've not tried any of the modern ones although the carbon bristle ones should work. It can be down to relative humidity or the lack of it so where you live can have a big bearing on static build up, the best things though are an acrylic platter with no other form of mat on it or an acrylic platter mat but that's not as good as the whole platter and then a zerostat gun. I have an old brush from way back made by Hunt E.D.A that works fine and it's very similar to a lot of others around back then. Quote Link to comment Share on other sites More sharing options...
aarondltd Posted June 11, 2015 Share Posted June 11, 2015 I have an old brush from way back made by Hunt E.D.A that works fine and it's very similar to a lot of others around back then. Thats the next one I have considered but I feel like they will be mostly similar. It does get better and worse depending on the weather. I tried adding a ground wire and it did nothing. I find that waving a ground wire carefully over records will discharge them but only if I hold them I think. Not ideal but cheaper than $100 zerostat. Have thought about making something like this though just to tap on the records. Quote Link to comment Share on other sites More sharing options...
allenh Posted June 11, 2015 Share Posted June 11, 2015 You just need an effective means of discharging the static. Some brushes I have seen have a grounding pad on the top that you put your finger on which makes you ground the static, never tried one though so I don't know if it's a gimmick or if it works Quote Link to comment Share on other sites More sharing options...
YouTwo Posted June 11, 2015 Share Posted June 11, 2015 could it be that I just have a noisy pressing? Is that a thing? It is definitely a thing. But it could also just be static. Does the record feel like it has a lot of static electricity on it when you handle it? Or does it stick to your slipmat? If it does, more than likely static is your problem. Quote Link to comment Share on other sites More sharing options...
aarondltd Posted June 12, 2015 Share Posted June 12, 2015 I would rather put this in a new thread but will post here just for people who actually use the search function. Don't use the Audioquest brush! Unless you want fibers in the grooves of your records and probably scratches them too. Audioquest "anti static" brush is a worthless piece of shit. Sure some get lucky with one that isn't but it shouldn't be that way. Also I'm pretty sure that many of these cheap brushes that look like this are the same shit with different names put on them. Now what? Unfortunately I have read some have bad experience with the Hunt E.D.A brushes not being made as well as they were. Quote Link to comment Share on other sites More sharing options...
dethrock Posted June 13, 2015 Share Posted June 13, 2015 I have that brush and it works just fine. Quote Link to comment Share on other sites More sharing options...
Tardcore Posted June 13, 2015 Share Posted June 13, 2015 using a legit RCM is one of the most satisfying experiences ever. Quote Link to comment Share on other sites More sharing options...
dethrock Posted June 13, 2015 Share Posted June 13, 2015 I have this one, loving it so far. Quote Link to comment Share on other sites More sharing options...
circuit bored records Posted June 13, 2015 Share Posted June 13, 2015 I have that brush and it works just fine.^yep. I also have an entry level RCM but for dry cleaning records the Audioquest one works perfectly. I never understood the complaints about it, I mean you would have to be applying a ton of unnecessary pressure in order to have bristles falling off the brush, at least from the couple that I've used they've been fine at removing minimal dust, debris, etc. Quote Link to comment Share on other sites More sharing options...
aarondltd Posted June 13, 2015 Share Posted June 13, 2015 Not sure what they are doing to make it that way. It's short fibers from the tips and not the whole bristles. Grazing the records. I didnt think it was even shedding until seeing tiny streaks on a white record with red splatter. Right into the grooves. Hunt brush is ordered. Quote Link to comment Share on other sites More sharing options...
allenh Posted June 14, 2015 Share Posted June 14, 2015 using a legit RCM is one of the most satisfying experiences ever. Yep, I've had an Okki Nokki for years Quote Link to comment Share on other sites More sharing options...
Gumbo72203 Posted June 14, 2015 Author Share Posted June 14, 2015 Will using a brush like that Audioquest one actually remove things from inside the grooves, or is it more for surface things like hair and paper sleeve particles left over? It's not so much static pops I'm looking to remove, but a lot of records I have are noisy with that rice krispies sort of sound going on. Every once in a while I'll have the loud actual pop but not super often. I think there's just dirt and dust and whatever else down in the grooves. I'm looking to just make them less noisy so that the quiet parts are quieter; would I be better served going for some sort of wet cleaning method like a Spinclean, or do you guys think a brush would suffice for what I'm after? I'm looking into some microfiber cloths too because I saw a video of a guy doing a home cleaning thing with just some distilled water, a couple drops of detergent, and microfiber cloths. I may do that as well, but would that be for excessively dirty records that are VERY noisy? Sorry if these are dumb questions, cleaning records is a totally new arena for me haha Quote Link to comment Share on other sites More sharing options...
aarondltd Posted June 14, 2015 Share Posted June 14, 2015 The "carbon fiber" brushes are just for a light surface cleaning before playing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.